UT200S Multi-channel Ultrasonic Thickness Gauge
High resolution – High speed – Large storage
YelTech/Broadsens provide advanced multichannel ultrasonic thickness measurement instruments that are essential for monitoring the structural integrity in a wide range of scenarios, e.g. robot-based inspection of boiler tubes, pipes, large containers, production line aluminium and steel plates.
The UT200S Multichannel Ultrasonic Thickness Gauge has four channels that can measure thickness in parallel. Ultrasonic thickness measurement is non-intrusive and highly accurate. The UT200S can be supplied as an OEM board or a fully enclosed option.
Reliable and Accurate
UT200S supports the common first-echo mode (most low-cost ultrasonic thickness gauges use this mode), high accuracy echo-echo mode, in which the structure painting or coating can be ignored by checking multiple echoes.
The accuracy of UT200S can reach 0.001mm in echo-echo mode with careful calibration and averaging of multiple echoes. UT200S also supports echo-II measurement, in which case the structure is submerged under water, and the ultrasonic probes have a distance of 1mm to 5mm to the structure.
Click/tap any image for a larger version
Enclosed Multichannel Thickness Gauge
Easy-to-use remote control software
UT200S can be controlled remotely via a network interface by YelTech/BroadMTM software. BroadMTM software controls the ultrasonic thickness gauges via a network interface (wired or wirelessly). The gain of each channel can be individually configured manually. Each channel can be turned on and off as required. History data and waveform can also be reviewed. The signals can be zoomed in/out to check out the patterns. UT200S can also be used for inspection in structures by checking out the response signals. Welding defects, solder joints defects, broken screws and nuts can be detected easily with the help of waveform analysis.
Click/tap any image for a larger version
Enclosed Multichannel Thickness Gauge Software
